HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset
#1
Geplaatst op 12 oktober 2011 - 22:25
Now, I can not connect to the dreambox via telnet of ftp. I'm not sure if the default password is gone, I can not give the login name, the cursor just blinks and after typing 1 character returns to command prompt.
I have tried via dreambox remote control - 6 Instellingen - Systeem Instellingen - Software Update - Put dreambox in ***STOP*** mode, but it will not stop :-((.
I have tried to shutdown the dreambox, unplug the power, and plug power in again while pressing the power button.
Any idea what could resolve this ???
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #2
Geplaatst op 12 oktober 2011 - 22:27
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #3
Geplaatst op 12 oktober 2011 - 22:36
Hold the button as long as you want. Use a pc with netscan to resolve the ip from the dm600 it might be different from the one you obtain when the box is normaly functioning. (you may also find the current ip by checking the dhcp leases in your router) but netscan would be most comfortable for most users.
Use webbrowser to go to http:\\192.168.1.31 (example!) en flash the fresh image.nfi to your DM600.
@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #4
Geplaatst op 13 oktober 2011 - 10:58
Now, things are getting worse. Can not save IP.
I think this is a HW problem. I get different error messages.
Power disconnecting/connecting with holding power button does not work, it just start ups.
I can not save any file (downloads), create bouquets, save new network settings...
Could it be a RAM malfunction ? Any way of testing the HW ?
Or corrupt core files ?
What is the best way to get a dreambox fixed ? (or to expensive ?)
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #5
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #6
Geplaatst op 13 oktober 2011 - 23:24
DM500,DM600,DM800HD,VU+ Duo
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #7
Geplaatst op 14 oktober 2011 - 19:33
I agree. Try Dreamup (and a null modem cable) to flash it.Because its a DM600 why not try a null modem cable and dreamup to reflash the image it could be as simple as the front panel switch being faulty. In this case I would definitey erase the flash before flashing a new image.
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #8
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #9
Geplaatst op 19 oktober 2011 - 00:47
1 unplug power from box
2 connect null modem cable
3 start dreamup
4 when asked in dreamup reconnect power to box.
you can also use terminal for windows to connect to the box and you should see a start up sequence when you power on the box with it connected.
If dreamup and terminal are failing there are a couple of possibilities
1 Try the power supply substitute it for a known good one it is worth a shot
2 The bootloader is corrupt you will nedd to jtag the box to fix that.
3 The serial port is faulty needs the max232 or similar chip replaced.
hope this is of some help
DM500,DM600,DM800HD,VU+ Duo
Re: HELP NEEDED: Unable to connect to Dreambox DM600 after factory reset #10
Geplaatst op 21 oktober 2011 - 20:22
So today, I bought a new null modem kabel, and YES, I could connect to the broken Dreambox.
I was able to flash the dreambox and everything seems to working fine again
Thx for the support guys !
Also tagged with one or more of these keywords: root password, factory reset, telnet
OpenPli root Password Protection?Begonnen door zwdpacjent, 2 feb 2022 root password, security |
|
|||
DM800SE - Clean install: alles weg. Hoe doe ik dat?Begonnen door ZoeperJ, 14 aug 2019 Flash, Backup, Factory Reset en nog 1... |
|
|||
telnet onstabiel ?Begonnen door Zingemneire, 3 jul 2012 telnet |
|
1 gebruiker(s) lezen dit onderwerp
0 leden, 1 bezoekers, 0 anonieme gebruikers