2047 replies to this topic

[balans]

ah fixed it tried the vtunerc.i686 from the original page and not my own compiled one and then it connected
nice never knew about it before vtuner rocks

[balans]

how i got it running

kill enigma with init 4, kill your running cardemu

vtunerd 1 01 2 0 & on the dm8000
start your emu and then start enigma with init 3

modprobe vtunerc on the i686
vtunerc -f s2 &

start openplipc

[nobody9]

@all
i have commit today some changes in the buffer handling into the git.

sd-channels MPEG2 and hd-channels MPEG4 from DVB-S2 works on my 2.4Ghz Dualcore without any problems.
plase test it.

nobody9

[Seal]

strange... i dont have picture on hd channels from Cyfrowy Polsat provider... channel list is correct, works on SH4 Enigma2 box...

i dont know if this is xine-lib problem or Enigma...

[nobody9]

with the todays version or older one.

i need a log from enigma2.

strange... i dont have picture on hd channels from Cyfrowy Polsat provider... channel list is correct, works on SH4 Enigma2 box...

i dont know if this is xine-lib problem or Enigma...

[shumifan50]

I am having trouble installing the vtuner daemon on a DM800:
1. I downloaded vtunerd.mipsel and ftp (binary mode) to dm800.
2. I put in place /etc/vtunerd.conf as per nessie tut.
3. I run "vtunerd.mipsel 1 0 0 0 0" or "vtunerd.mipsel 1 0 0 0" and it fails with "segmentation fault".

Any help appreciated.

My installation on Ubuntu 11.10 of kernel module seemed to be OK, but I wont know until I have a server to test against.


Note: I could not find an ipkg to do the installation - all ipkgs seem to be for client. Could only find vtunerd.mipsel in downloads.

Edited by shumifan50, 16 December 2011 - 16:01.

[shumifan50]

Strangely enough I did exactly the same thing on my DM500HD running openPli and it works - well it runs, so it seems like it is a DM800HD/Blackhole image problem.

[telping]

hello @nobody9
the previous version of cougar_enigma have many flaws with sd or hd h264 with your patch applied "patch16" to xine-lib, vdr is working good,
in your version of enigma2_openpli, the latest in git when I write this cant get video since the enigma2 gives me this information.

adapter0/demux0 idx 0: change to even key
adapter0/demux0 idx 0: even key not ready (200 ms)
adapter0/demux0 idx 0: not active. wait skipped

I do not know if you test this feature.

I do not know if we can talk about it
if i run enigma2_cougar all is working good with this feature.

best regards

[if99nrg]

Strangely enough I did exactly the same thing on my DM500HD running openPli and it works - well it runs, so it seems like it is a DM800HD/Blackhole image problem.

Hello, in vtuner package are more file , plz mate can u dezvolt how to install (wich files/folder instalation) on DM500HD OpenPli
I am not a coder but i like the ideea allso, would be nice to have openpliPC in xbmc.
Regards

[Seal]

with the todays version or older one.

With nevest patches (but without latest version change git commit).

For easier logs reading:
openPLi starts on channel TVN - works, i changed to Polsat HD - not works - no picture and afert that changed to Polsat - works.

My configuration:
Asrock ION 330HT, TBS QBOX S2, Ubuntu 10.04.3 desktop fully upgraded on 05 december all packages installed from your scripts, nothing more.

Logs attached.  e2.zip   9.06KB   29 downloads

Edited by Seal, 17 December 2011 - 09:20.

[Raider05]

Using the budget dvb-card Omicom SS4 and
I have patched with the latest xine-lib20111216 continuous slide show and there is no sound, SD or HD channels, OpenPLI, Nemesis or Enigma2PC (cougar_enigma branch new_xine_plugin). Sound when you change appears for a split second and silence. Me log
Here log with patches of 12.12.2011 and when viewing the channel MPEG4. HD slide show and also crash, SD MPEG-2 showed a normal

@ nobody9, thank you very much for your work, maybe you can do as VDR.
As I understood, the VDR stream before it reaches the FIFO is processed files (remux.c, remux.h) and then another vdr-xine (vdr-xinelibout) still processes it and sends it to the FIFO. Since with the same xine-lib VDR works without problems, then it may be necessary to change something in the code Enigma2?

PS: I beg pardon for my bad english

[nobody9]

@Raider05,
please test the lastest commit from me(5 minutes old), i have changed the demux_ts module from xine-lib and shrink the buffer size.

Using the budget dvb-card Omicom SS4 and
I have patched with the latest xine-lib20111216 continuous slide show and there is no sound, SD or HD channels, OpenPLI, Nemesis or Enigma2PC (cougar_enigma branch new_xine_plugin). Sound when you change appears for a split second and silence. Me log
Here log with patches of 12.12.2011 and when viewing the channel MPEG4. HD slide show and also crash, SD MPEG-2 showed a normal

@ nobody9, thank you very much for your work, maybe you can do as VDR.
As I understood, the VDR stream before it reaches the FIFO is processed files (remux.c, remux.h) and then another vdr-xine (vdr-xinelibout) still processes it and sends it to the FIFO. Since with the same xine-lib VDR works without problems, then it may be necessary to change something in the code Enigma2?

PS: I beg pardon for my bad english

[nobody9]

@Seal,

1) from log: vo_vdpau: this hardware doesn't support mpeg4-part2.
i think the hd channes are in mpeg4

2) please test with the todays git.

with the todays version or older one.

With nevest patches (but without latest version change git commit).

For easier logs reading:
openPLi starts on channel TVN - works, i changed to Polsat HD - not works - no picture and afert that changed to Polsat - works.

My configuration:
Asrock ION 330HT, TBS QBOX S2, Ubuntu 10.04.3 desktop fully upgraded on 05 december all packages installed from your scripts, nothing more.

Logs attached.  e2.zip   9.06KB   29 downloads

[nobody9]

@raider05,

in the version from yesterday was the buffer disabled. i commited the wrong patch.
My english i also not so good.

nobody9

Using the budget dvb-card Omicom SS4 and
I have patched with the latest xine-lib20111216 continuous slide show and there is no sound, SD or HD channels, OpenPLI, Nemesis or Enigma2PC (cougar_enigma branch new_xine_plugin). Sound when you change appears for a split second and silence. Me log
Here log with patches of 12.12.2011 and when viewing the channel MPEG4. HD slide show and also crash, SD MPEG-2 showed a normal

[ambrosa]

Since now enigma2/ tree is included in openpliPC main repo.
The enigma2 tree is patched by nobody9 and it's ready to compile.

So when you do the first "git clone" or a "git pull" to openpliPC repo be patient: you download the full enigma2/ tree


Next step will be to include xine-lib in the same way to main openpliPC repo.

[telping]

hello, dvbsoftwareca dont have makefile

dvbsoftwareca from old git dont work on openpliPC only on cougar_enigma2PC

H264 and LATM audio is working ok on open channels.

cant test more because my subscription card is not working on openpliPC

regards

[Seal]

hello, dvbsoftwareca dont have makefile

dvbsoftwareca from old git dont work on openpliPC only on cougar_enigma2PC

H264 and LATM audio is working ok on open channels.

cant test more because my subscription card is not working on openpliPC

regards

dvbsoftwareca is in engma2 openpli git too. Compiled without problems and works

[Seal]

@Seal,

1) from log: vo_vdpau: this hardware doesn't support mpeg4-part2.
i think the hd channes are in mpeg4

No they are not. With VDR these channels works.

I will test later new patches.

[telping]

hello, dvbsoftwareca dont have makefile

dvbsoftwareca from old git dont work on openpliPC only on cougar_enigma2PC

H264 and LATM audio is working ok on open channels.

cant test more because my subscription card is not working on openpliPC

regards

dvbsoftwareca is in engma2 openpli git too. Compiled without problems and works

Makefile 35 minutes ago

thanks, go test

best regards

[ambrosa]

Xine-lib now included in openpliPC repo.
build_enigma2.sh is renamed to build_openpliPC.sh and it compile xine-lib and enigma2

From README :

2) Building needed openpliPC enigma2 libraries:
It download, build and install all needed libraries
Some tasks require root access (sudo). You will be asked for your password.
This task must be run ONCE at the first time. These libs are compiled from
its original sources and aren't patched anyway.

./build_libs.sh
If you are interested to have a logfile , simply do:
./build_libs.sh 2>&1 | tee build_libs.log



3) Build Xine-lib and openpliPC Enigma2:
It compile and install xine-lib and the openpliPC Enigma2.
xine-lib and enigma2 are included in openpliPC main repo and code
is already patched ready to compile.
Some tasks require root access (sudo). You will be asked for your password.

./build_openpliPC.sh
If you are interested to have a logfile , simply do:
./build_openpliPC.sh.sh 2>&1 | tee build_log.log

Edited by ambrosa, 17 December 2011 - 14:49.