Jump to content


Photo

BackupSuite


  • Please log in to reply
1306 replies to this topic

Re: BackupSuite #401 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 14 August 2014 - 18:51

The feed is set ready ok... But somehow it is not removed from the actual feed,... So someone else should check the scripts on the buildserver...

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: BackupSuite #402 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 14 August 2014 - 19:58

Here everything seems allright (see the result below) so how is it possible that there is a different outcome of the list command?

root@vuduo:~# opkg list | grep backups
enigma2-plugin-extensions-backupsuite - 1.0+git12+6215156-r0 - enigma2-plugin-ex
tensions-backupsuite version
enigma2-plugin-extensions-backupsuite-dev - 1.0+git12+6215156-r0 - enigma2-plugi
n-extensions-backupsuite version
root@vuduo:~#

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: BackupSuite #403 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 14 August 2014 - 20:11

That is on a VuDuo. From what I understand only the ET4K and 8K still have an issue.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: BackupSuite #404 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 14 August 2014 - 20:27

Indeed, only, as far as I can see, the ET8000 and ET4x00 have still problems with the 3rd party feed, the file /var/lib/opkg/openpli-3rd-party-et8000 (and et4x00) they still contains the "old" backupsuite 17.8

Other boxes have no problems


Edited by Pedro_Newbie, 14 August 2014 - 20:28.


Re: BackupSuite #405 erkman

  • Senior Member
  • 90 posts

+2
Neutral

Posted 14 August 2014 - 20:39

Thanks Pedro for this hint, this solved my Problem for the Moment.

removed this

Package: enigma2-plugin-extensions-backupsuite
Version: 17.8
Description: BackupSuite. Backup & restore complete images.
Architecture: mips32el
Maintainer: Pedro_Newbie (backupsuite@outlook.com)
Depends: mtd-utils, mtd-utils-ubifs, ofgwrite
Filename: enigma2-plugin-extensions-backupsuite_17.8_mips32el.ipk
Size: 82878
MD5Sum: a6338c42914c70f67263e57a73b897ba

from /var/lib/opkg/openpli-3rd-party-et4x00

and then opkg install enigma2-plugin-extensions-backupsuite

 

now i have the git version installed and its running


ET9200 openpli 6.2 ET4000 openpli 4 Solo2 openpli 7.2


Re: BackupSuite #406 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 14 August 2014 - 22:04

...every cloud has a silver lining ;)

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: BackupSuite #407 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 15 August 2014 - 06:33

The problems still persists in the 3rd-party feed for the et4x00 and et8000. The other models can be updated/upgraded online
 
To update your receiver and the backupsuite:
- remove/uninstall the BackupSuite if there is still an copy installed
- Run an update via the menu
- Copy attached version of the BackupSuite to your receiver to /tmp/
- In telnet give the command
opkg install /tmp/enigma2-plugin-extensions-backupsuite_1.0+git13+82ffd34-r0_mips32el.ipk
 
This install the right version, you can't upgrade the backupsuite online until the problems are solved
 
What's new:
Changed in 18.0
- Added messagebox to confirm the start of the backup process of the HDD and USB option
- Added support for the Xtrend ET7000 and ET7500
- Added support for the Mutant/Opticum HD2400 and the Mutant HD1100

Attached Files



Re: BackupSuite #408 vlastvs499

  • Member
  • 2 posts

0
Neutral

Posted 15 August 2014 - 09:55

Thanks Pedro!!! Now is all ok! In your above instructions - 100% OK (ET4000).



Re: BackupSuite #409 Ronang_1999

  • Member
  • 2 posts

0
Neutral

Posted 17 August 2014 - 11:17

Unfortunately my success message came too early:

 

still have problems with my et4x00:

 

error message is as follows:

error!: cannot stat "media/PKBACK"

referred from section "ubifs"

error 2 (no such file or directory)

cmod: /media/PCBACK# 001/bi/root.ubifs:

no such file or directory



Re: BackupSuite #410 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 17 August 2014 - 11:49

The # in your label from the USB-stick is causing troubles I guess. I can reproduce it if I call my USB-stick also PCBACK# 001 even without the space it gives trouble, without the hashtag all works fine



Re: BackupSuite #411 Ronang_1999

  • Member
  • 2 posts

0
Neutral

Posted 17 August 2014 - 13:34

Hi Pedro,

 

I renamed the stick and lo and behold!!!

It works!!!!!!!!

Tks so much.

 

Best regards

 

Ron



Re: BackupSuite #412 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 31 August 2014 - 06:51

With today's version is also the Swedish language available.
 
Big thanks to H2SO4JB who made the translation!



Re: BackupSuite #413 apollo0073

  • Member
  • 3 posts

0
Neutral

Posted 18 September 2014 - 23:29

hi all

i have the latest installed and new OpenPLi-4.0-beta-vusolo2-20140918 and get this issue which creates a backup of 25mb.

any ideas please

 

Create: root.ubifsError: failed to read file

`/tmp/bi/root/usr/libsqlite3.so.0.8.6`

           Imput/ouput error (error 5)



Re: BackupSuite #414 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 19 September 2014 - 18:55

I think you could try to reinstall the package with

opkg install libsqlite3-0 --force-reinstall

Maybe this solves the problem?



Re: BackupSuite #415 apollo0073

  • Member
  • 3 posts

0
Neutral

Posted 19 September 2014 - 19:20

thanks , i have tried reinstall and now it creates a backup of 56mb that should be 100mb. 23mb more but incorrect i believe :(



Re: BackupSuite #416 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 19 September 2014 - 19:22

I think the solution is to flash a fresh image, somehow your flash is corrupt I guess



Re: BackupSuite #417 apollo0073

  • Member
  • 3 posts

0
Neutral

Posted 19 September 2014 - 19:50

yes i was thinking the same, a pain but thanks for your help :)



Re: BackupSuite #418 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 29 November 2014 - 21:07

Because of the recent changes in the build environment / updates the version numbering  is changed a bit at the Openpli side.

To ensure you'll get the updates for the BackupSuite it is necessary to remove and reinstall the BackupSuite once. After this action the updates will be installed again when you run an update.

Now the newest version number is 20+git2.

 

The latest changes are:

27-11-2014

- Added support for the new VU+ Zero (Thanks to 2boom)

 

23-11-2014

- Restored the support for the Formuler F1 & F3

- Rearranged the code a bit, now first starting with the least time consuming part, the kerneldump

 



Re: BackupSuite #419 ghuss

  • Senior Member
  • 62 posts

0
Neutral

Posted 30 November 2014 - 08:46

Because of the recent changes in the build environment / updates the version numbering  is changed a bit at the Openpli side.

To ensure you'll get the updates for the BackupSuite it is necessary to remove and reinstall the BackupSuite once. After this action the updates will be installed again when you run an update.

Now the newest version number is 20+git2.

 

The latest changes are:

27-11-2014

- Added support for the new VU+ Zero (Thanks to 2boom)

 

23-11-2014

- Restored the support for the Formuler F1 & F3

- Rearranged the code a bit, now first starting with the least time consuming part, the kerneldump

Thanks

 

I have uninsulated and installed 27-11-2014 version

Backup is not processed

 

See :

Attached File  1_0_1_1FBE_189C_FBFF_820000_0_0_0.jpg   80.6KB   7 downloadsAttached File  1_0_1_1FBE_189C_FBFF_820000_0_0_0 (1).jpg   77.61KB   7 downloads

 

 

Thanks

 


Vu+ Duo 2 


Re: BackupSuite #420 Pedro_Newbie

  • Senior Member
  • 4,631 posts

+225
Excellent

Posted 30 November 2014 - 08:53

Just delete the file speed.txt in your folder: /usr/lib/enigma2/python/Plugins/Extensions/BackupSuite/

and try again. I think the value 0 is stored in speed.txt




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users