Dish.py

Started by Dimitrij, 27 Jul 2013 07:41

Next
»

Please log in to reply

63 replies to this topic

#1 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 27 July 2013 - 07:41

To ims

sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr AVL2108, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr AVL2108, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: advanced
add 48 to 1
add 90 to 1
add 130 to 1
add 360 to 2
add 530 to 1
add 550 to 1
add 559 to 2
add 600 to 1
add 3560 to 1
slot: 1 configmode: simple
diseqcmode:  diseqc_a_b
sec config completed
action ->  MsgBoxActions ok
playing 1:0:19:4E89:14:70:1680000:0:0:0:
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0014:0070
opening frontend 0
(0)tune
RotorCmd 05, lastRotorCmd ffffffff
set rotor timeout to 360 seconds
prepare_sat System 0 Freq 12130000 Pol 3 SR 27500000 INV 2 FEC 0 orbpos 360 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1380 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:4E89:14:70:1680000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f5(?)
[SEC] sleep 50ms
[SEC] sleep 700ms
action ->  OkCancelActions ok
start release channel timer
Creating setup
[SEC] sendDiseqc: e03160(?)
[SEC] sleep 50ms
[SEC] sendDiseqc: e03160(?)
[SEC] sleep 500ms
set sequence pos 3
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316b05(?)
[SEC] sleep 1000ms
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Screens/Dish.py", line 73, in updateRotorMovingState
  File "/usr/lib/enigma2/python/Screens/Screen.py", line 155, in show
  File "/usr/lib/enigma2/python/Screens/Dish.py", line 95, in __onShow
  File "/usr/lib/enigma2/python/Screens/Dish.py", line 162, in getTunerName
  File "/usr/lib/enigma2/python/Screens/Dish.py", line 152, in getCurrentTuner
AttributeError: 'NoneType' object has no attribute 'get'
(PyObject_CallObject(<bound method Dish.updateRotorMovingState of <class 'Screens.Dish.Dish'>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #2 ims

PLi® Core member
13,621 posts

+212

Excellent

Posted 27 July 2013 - 09:03

hmm... how often GOD ? How you have conected rotor ? I will add conditions...

Kdo nic nedělá, nic nezkazí!

Re: Dish.py #3 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 27 July 2013 - 09:15

hmm... how often GOD ? How you have conected rotor ? I will add conditions...

Crash occurs when you configure the positioner.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #4 ims

PLi® Core member
13,621 posts

+212

Excellent

Posted 27 July 2013 - 09:59

I think, it was after clear flash without restoring configs ?

Try this and let me know.

Attached Files

Dish.py.tar.gz 2.1KB 13 downloads

Kdo nic nedělá, nic nezkazí!

Re: Dish.py #5 vasilich07

Senior Member
155 posts

+4

Neutral

Posted 27 July 2013 - 12:03

I think, it was after clear flash without restoring configs ?

Try this and let me know.

To ims

Once the file is installed Dish.py, everything was OK

GI ET11000,Vu+DUO2 - 4W-90E Supral 120 (motor Stab HH 120), 36Е- satellite antenna Nokia - 90

xtrend ET9000 - Tests without a permanent connection

Re: Dish.py #6 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 27 July 2013 - 12:30

Try this and let me know.

Everything is fine.
Thank you.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #7 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 28 July 2013 - 16:08

Problem for rotor.

Example:

1)rotor position 23.5е

2)zap to 4.8e

3)Dish show(turnTime = 14sec)

4)it took three seconds -->Dish hide

Why?

[eDVBCAService] new service 1:0:19:51E0:C96:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:51E0:C96:3:EB0000:0:0:0:
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1375023264)
action ->  InfobarChannelSelection openServiceList
[ePNG] couldn't open /usr/share/enigma2/anim/a0.png
[ePNG] couldn't open /usr/share/enigma2/anim/a1.png
[ePNG] couldn't open /usr/share/enigma2/anim/a2.png
[ePNG] couldn't open /usr/share/enigma2/anim/a3.png
[ePNG] couldn't open /usr/share/enigma2/anim/a4.png
[ePNG] couldn't open /usr/share/enigma2/anim/a5.png
[ePNG] couldn't open /usr/share/enigma2/anim/a6.png
[ePNG] couldn't open /usr/share/enigma2/anim/a7.png
action ->  ChannelSelectBaseActions nextBouquet
[ePNG] couldn't open /usr/share/enigma2/anim/a0.png
[ePNG] couldn't open /usr/share/enigma2/anim/a1.png
[ePNG] couldn't open /usr/share/enigma2/anim/a2.png
[ePNG] couldn't open /usr/share/enigma2/anim/a3.png
[ePNG] couldn't open /usr/share/enigma2/anim/a4.png
[ePNG] couldn't open /usr/share/enigma2/anim/a5.png
[ePNG] couldn't open /usr/share/enigma2/anim/a6.png
[ePNG] couldn't open /usr/share/enigma2/anim/a7.png
action ->  ChannelSelectBaseActions nextBouquet
[ePNG] couldn't open /usr/share/enigma2/anim/a0.png
[ePNG] couldn't open /usr/share/enigma2/anim/a1.png
[ePNG] couldn't open /usr/share/enigma2/anim/a2.png
[ePNG] couldn't open /usr/share/enigma2/anim/a3.png
[ePNG] couldn't open /usr/share/enigma2/anim/a4.png
[ePNG] couldn't open /usr/share/enigma2/anim/a5.png
[ePNG] couldn't open /usr/share/enigma2/anim/a6.png
[ePNG] couldn't open /usr/share/enigma2/anim/a7.png
[ePNG] couldn't open /usr/share/enigma2/anim/a0.png
[ePNG] couldn't open /usr/share/enigma2/anim/a1.png
[ePNG] couldn't open /usr/share/enigma2/anim/a2.png
[ePNG] couldn't open /usr/share/enigma2/anim/a3.png
[ePNG] couldn't open /usr/share/enigma2/anim/a4.png
[ePNG] couldn't open /usr/share/enigma2/anim/a5.png
[ePNG] couldn't open /usr/share/enigma2/anim/a6.png
[ePNG] couldn't open /usr/share/enigma2/anim/a7.png
action ->  OkCancelActions ok
playing 1:0:1:19E6:10:55:300000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:51E0:C96:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:19:51E0:C96:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
cleaning up
TuxTxt cache cleared
start release channel timer
[ePNG] couldn't open /usr/share/enigma2/anim/a0.png
[ePNG] couldn't open /usr/share/enigma2/anim/a1.png
[ePNG] couldn't open /usr/share/enigma2/anim/a2.png
[ePNG] couldn't open /usr/share/enigma2/anim/a3.png
[ePNG] couldn't open /usr/share/enigma2/anim/a4.png
[ePNG] couldn't open /usr/share/enigma2/anim/a5.png
[ePNG] couldn't open /usr/share/enigma2/anim/a6.png
[ePNG] couldn't open /usr/share/enigma2/anim/a7.png
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x713fe1e0
[eEPGCache] remove channel 0x713fe1e0
[EPGC] abort caching events !!
allocate channel.. 0010:0055
(0)tune
Entry for 4,8? not in Rotor Table found... i try gotoXX?
siteLatitude = 53.667000, siteLongitude = 11.400000, 4.800000 degrees
PolarmountHourAngle=187.246844
RotorCmd = d073
RotorCmd d073, lastRotorCmd e0d5
set rotor timeout to 42 seconds
prepare_sat System 0 Freq 12130000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 48 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1530 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:19E6:10:55:300000:0:0:0:
allocate demux
[SEC] set static current limiting
use cached_channel
use cached_channel
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 4
set sequence pos 5
set sequence pos 3
[SEC] invalidate current rotorparams
[SEC] sendDiseqc: e0316ed073(?)
[SEC] sleep 1000ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] setFrontend 0
setting frontend 0
[SEC] set timeout 168
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[DVBCAHandler] no more services
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] rotor locked step 4 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[SEC] rotor locked step 0 failed (not locked)
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 0 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 1 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 2 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 3 ok
set sequence pos -3
[SEC] sleep 250ms
[SEC] locked step 4 ok
ok > 4 .. goto 3

set sequence pos 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x71892260 running
[eEPGCache] channel 0x71892260 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (19e7), and 1 audio stream(s) (19e8), and the pcr pid is 19e7, and the text pid is ffffffff
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=6631, apid=6632
DMX_SET_PES_FILTER(0x19e7) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x19e8) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x19e7) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[eDVBCAService] new service 1:0:1:19E6:10:55:300000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:19E6:10:55:300000:0:0:0:
__serviceTuneEnd//////////////////////////////////////
RemovePopup, id = ZapError
[SEC] update current rotorparams 156 d073 48
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
PATready
no PAT entry found.. start delay
ignore sdt update data.... incorrect transponder tuned!!!
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
DVB service failed to tune - error 3
(0)fe event: status 20, inversion off, m_tuning 1
FE_TIMEDOUT! ..abort
[EPGC] start caching events(1375023277)
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
732
(0)fe event: status 1f, inversion off, m_tuning 0
PATready
use pmtpid 19e6 for service_id 19e6
eventNewProgramInfo 0 0
have 1 video stream(s) (19e7), and 2 audio stream(s) (19e8, 19e9), and the pcr pid is 19e7, and the text pid is ffffffff
decoder state: play, vpid=6631, apid=6632
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #8 ims

PLi® Core member
13,621 posts

+212

Excellent

Posted 28 July 2013 - 16:23

It cannot be in Dish. Dish is for displaying icon only. I think, from e2 incoming, that rotor does not turning yet and then is dish hide.

My problem ( from yesterday's evening to todays morning - 0.8W to 23.5E ... time 19s, after 10s Dish hide, after 1s error on screen: (Service not found! SID is not in PID), after next 8sec discoveded signal on TV (error still over screen). But id was only from 0.8W to 23.5E and only on 12525V (23.5E).

=> in my case it seems, as some timer for lock taking bad time for turning. But why only for one transponder ?

Today i known, that my motor, when I want turning to 30W, it stops on 13.0E and scaning services from this position. But 15W works well...

Kdo nic nedělá, nic nezkazí!

Re: Dish.py #9 ims

PLi® Core member
13,621 posts

+212

Excellent

Posted 28 July 2013 - 16:28

do you have set true parameters for your motor ? H/V moving/sec ?

Before changes you do not saw it, because there was used value 1.0 and 1.5 degress/sec and not true value from config =>there was displayed "nothing tolking counting". From + to - .

I think, now, when are "real" counting (added +3sec) is visible, that there could be some wrong in routines for motor...

Edited by ims, 28 July 2013 - 16:57.

Kdo nic nedělá, nic nezkazí!

Re: Dish.py #10 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 28 July 2013 - 16:55

do you have set true parameters for your motor ? H/V moving/sec ?

Yes,but these values do not work correctly.

Always displays the same value for Dish:

vertical polarization 1.7*/s

horizontal polarization 2.3*/s

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #11 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 28 July 2013 - 17:26

Before changes you do not saw it, because there was used value 1.0 and 1.5 degress/sec and not true value from config =>there was displayed "nothing tolking counting". From + to - .

I think, now, when are "real" counting (added +3sec) is visible, that there could be some wrong in routines for motor...

my real values:

	def getTurnTime(self, start, end, pol=0):
		mrt = abs(start - end) if start and end else 0
		if mrt > 0:
			if (mrt > 1800):
				mrt = 3600 - mrt
			if (mrt % 10):
				mrt += 10
			#mrt = (mrt * 2000) / 10000 + 3	# 0.5° per second
			if pol in (1, 3):	# vertical
				mrt = (mrt * 700) / 10000 + 3
			else:	# horizontal
				mrt = (mrt * 567) / 10000 + 3
		return mrt

Edited by Dima73, 28 July 2013 - 17:26.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #12 ims

PLi® Core member
13,621 posts

+212

Excellent

Posted 28 July 2013 - 17:30

I dont understand ...

You must set there in Tuner config value for your motor (read it in rotor user guide or on google). If values 700 and 567 worked for you well, then it seems, your motor is 1,4*/sec (V) and 1,7*/sec (H), imho

Kdo nic nedělá, nic nezkazí!

Re: Dish.py #13 littlesat

PLi® Core member
56,232 posts

+691

Excellent

Posted 28 July 2013 - 17:33

When the dish goes by a satellite and the tuner can tune to a transponder on a satellite that came by you can get this error... I suggest the tunein part must be changed so the dish picture is not hiden... I suggert the complete tunein stuf can be removed.... Service start should be enough... Especially when in addition it is correctly timed.
What also could be suggested is start tuning when it timed out... And not start tuning before the dish start to being turned.

Edited by littlesat, 28 July 2013 - 17:34.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: Dish.py #14 Robinson

Senior Member
2,616 posts

+30

Good

Posted 28 July 2013 - 18:06

My problem ( from yesterday's evening to todays morning - 0.8W to 23.5E ... time 19s, after 10s Dish hide, after 1s error on screen: (Service not found! SID is not in PID), after next 8sec discoveded signal on TV (error still over screen). But id was only from 0.8W to 23.5E and only on 12525V (23.5E).

I have been experiencing this "service not found" staying on the screen even when the dish reaches the right satellite position for several weeks if not months.

However, I do not see any patterns. Sometimes the message appears and sometimes it does not.

I have ET9000.

ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: Dish.py #15 littlesat

PLi® Core member
56,232 posts

+691

Excellent

Posted 28 July 2013 - 18:12

I tried to explain a possible way you can get this....

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: Dish.py #16 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 28 July 2013 - 18:23

I dont understand ...

You must set there in Tuner config value for your motor (read it in rotor user guide or on google). If values 700 and 567 worked for you well, then it seems, your motor is 1,4*/sec (V) and 1,7*/sec (H), imho

Example settings zero.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #17 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 28 July 2013 - 18:35

I tried to explain a possible way you can get this....

The problem is much deeper.

eventNewProgramInfo 0 0
have 1 video stream(s) (020a), and 1 audio stream(s) (0064), and the pcr pid is 020a, and the text pid is ffffffff
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=522, apid=100
DMX_SET_PES_FILTER(0x20a) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x64) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x20a) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
__serviceTuneEnd////////////////////////////////////// = iPlayableService.evTunedIn: self.__serviceTuneEnd or iPlayableService.evTuneFailed:

Where does this service? Rotor not yet reached the desired satellite!!!!!!!!!!!!!
[eDVBCAService] new service 1:0:19:51E0:C96:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:51E0:C96:3:EB0000:0:0:0:
RemovePopup, id = ZapError
PATready
no PAT entry found.. start delay
[SEC] update current rotorparams 196 e0d5 235
set sequence pos 4
[SEC] update current switch params
[SEC] sleep 500ms
[SEC] set dynamic current limiting
ignore sdt update data.... incorrect transponder tuned!!!
DVB service failed to tune - error 3
RemovePopup, id = ZapError
AddPopup, id = ZapError
[EPGC] start caching events(1375032594)
(0)fe event: status 20, inversion off, m_tuning 1
FE_TIMEDOUT! ..abort
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
(0)fe event: status 1f, inversion off, m_tuning 0
PATready
no PAT entry found.. start delay
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
DVB service failed to tune - error 3
(0)fe event: status 20, inversion off, m_tuning 0
stateLostLock
OURSTATE: lost lock, trying to retune
(0)tune
Entry for 23,5? not in Rotor Table found... i try gotoXX?
siteLatitude = 53.667000, siteLongitude = 11.400000, 23.500000 degrees
PolarmountHourAngle=166.722342
RotorCmd = e0d5
RotorCmd e0d5, lastRotorCmd e0d5
prepare_sat System 1 Freq 12129000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1529 mhz
OURSTATE: tuning
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01039f0(?)
[SEC] sleep 190ms
[SEC] sendDiseqc: e11039f0(?)
[SEC] sleep 50ms
[SEC] sleep 70ms
[SEC] sendDiseqc: e01039f0(?)
[SEC] sleep 190ms
[SEC] sendDiseqc: e11039f0(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
PATready
use pmtpid 0a64 for service_id 51e0
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (020a), and 1 audio stream(s) (0064), and the pcr pid is 020a, and the text pid is ffffffff
decoder state: play, vpid=522, apid=100
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
RemovePopup, id = ZapError
eventNewProgramInfo 0 0
have 1 video stream(s) (020a), and 1 audio stream(s) (0064), and the pcr pid is 020a, and the text pid is ffffffff
decoder state: play, vpid=522, apid=100
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
PATready
use pmtpid 0a64 for service_id 51e0
eventNewProgramInfo 0 0
have 1 video stream(s) (020a), and 1 audio stream(s) (0064), and the pcr pid is 020a, and the text pid is ffffffff
decoder state: play, vpid=522, apid=100
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[SEC] set dynamic current limiting

Edited by Dima73, 28 July 2013 - 18:36.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #18 ims

PLi® Core member
13,621 posts

+212

Excellent

Posted 28 July 2013 - 18:41

mmm, it seems, that for this configuration are not read value from config too and are used 2.3(H) and 1.7(V)

But once again - displaying time and rotor speed (via Dish.py) has no effect for tunning.

At first, I must see, what happend with my rotor on roof.

Kdo nic nedělá, nic nezkazí!

Re: Dish.py #19 Dimitrij

PLi® Core member
9,986 posts

+338

Excellent

Posted 28 July 2013 - 18:48

But once again - displaying time and rotor speed (via Dish.py) has no effect for tunning.

I know.
The problem tunning = binary enigma2 and it is much more important.

GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K

Re: Dish.py #20 littlesat

PLi® Core member
56,232 posts

+691

Excellent

Posted 28 July 2013 - 18:54

Therefore i suggest to turn and then tune... And force it to horizontal 18v... As that always turns faster.

At the popup shortly appears could be related to the changes in the zaperror popup in infobargenerics as they can now instantly appear and disappear. Possibly it can be suggested not to let them appear if the dish screen is shown...

I do not have a turnable dish so i need help from you...

Edited by littlesat, 28 July 2013 - 18:57.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Next
»

Back to [EN] Enduser support

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

ATTENTION !!!

Dish.py

#1 Dimitrij

Re: Dish.py #2 ims

Re: Dish.py #3 Dimitrij

Re: Dish.py #4 ims

Attached Files

Re: Dish.py #5 vasilich07

Re: Dish.py #6 Dimitrij

Re: Dish.py #7 Dimitrij

Re: Dish.py #8 ims

Re: Dish.py #9 ims

Re: Dish.py #10 Dimitrij

Re: Dish.py #11 Dimitrij

Re: Dish.py #12 ims

Re: Dish.py #13 littlesat

Re: Dish.py #14 Robinson

Re: Dish.py #15 littlesat

Re: Dish.py #16 Dimitrij

Re: Dish.py #17 Dimitrij

Re: Dish.py #18 ims

Re: Dish.py #19 Dimitrij

Re: Dish.py #20 littlesat

1 user(s) are reading this topic