Poll: settings and transponder scanning on satellite
Re: Poll: settings and transponder scanning on satellite #2
Posted 22 January 2014 - 12:48
p.s. There is a similar poll in the Dutch section. Please don't answer both polls!
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Poll: settings and transponder scanning on satellite #3
Posted 22 January 2014 - 13:48
I usually use my own channel list wich I backuping with DreamboxEdit.
During the new software installation, I have at once the present status accustomed, which I can upload with DreamboxEdit.
I also tried the new PLI Fastscan- it's good but unfortunately there are no service providers, whom I use.
Henksat/Hans/etc. complete settings - I'm doing with these things too cluttered. With my Qboxes I use iSettingE2 and it has the same shortcomings- too cluttered. Definitely is good that these things like Henksat/Hans/etc. exists but I personally do not use them for the reasons stated above.
Z
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Poll: settings and transponder scanning on satellite #4
Posted 22 January 2014 - 14:31
I don't understand any of these lists. Tried dreambox edit and I don't understand that either. So I just just fastscan (canal Digitaal) from where I copy the channels I actually watch to a folder "favorites".
Vu+ Ultimo 4K (4 TB HD, DVBS FSB, DVBC FBC & OpenPli 9),
Xtrend ET10000 (1 DVBS works via ethernet & OpenPli 9),
Xtrend ET10000 (DVBT2 & OpenPli 9, located in Thailand). Only latest stable releases.
Xtrend ET10000 (works via ethernet & OpenPli 9) and
Xtrend ET8000 (1 TB HD, 1 DVBT2 & works via ethernet & OpenPli 9)
Re: Poll: settings and transponder scanning on satellite #5
Re: Poll: settings and transponder scanning on satellite #6
Posted 26 January 2014 - 10:22
You may get more response if you pin this thread...
Pinned
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Poll: settings and transponder scanning on satellite #7
Posted 26 January 2014 - 18:51
I use http://www.vhannibal.net It's much more accurate. They update the entire motor settings for Enigma2 two times a month. No need to do any scans...
Edited by robertut, 26 January 2014 - 18:51.
Re: Poll: settings and transponder scanning on satellite #8
Posted 26 January 2014 - 19:14
And yes, Vhannibal lists are good.
I'll try to check in future whether iSettingE2 Plugin is compatible with the PLI software, it is also pretty good and it contains Vhannibal also.
And I will try in the near future the Henksat list too. Unfortunately, I have not yet reached a try it.
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Poll: settings and transponder scanning on satellite #9
Re: Poll: settings and transponder scanning on satellite #10
Re: Poll: settings and transponder scanning on satellite #11
Re: Poll: settings and transponder scanning on satellite #12
Posted 6 February 2014 - 20:03
Henksat E2 Channelsettings
Astra 19.2 Astra 28.2 Astra 23.5 Hotbird 13.0 Sirius 4.8 & Thor 0.8
I like it to be slightly lower, like
Astra 19.2 Hotbird 13.0 Sirius 4.8 & Thor 0.8
Could I have a request? (remove the Astra 28.2 and Astra 23.5 and make a new and simpler list for 4 satellites). May I merge it to my list and how then update it? I understand that it will have from time to time the updates, but I want to keep also my own list besides the Henksat list. Is it possible so that my list would not write over when I'll update it with Henksat settings?
DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB
Vertex 4K60 4:4:4 600MHz
Re: Poll: settings and transponder scanning on satellite #13
Re: Poll: settings and transponder scanning on satellite #14
Posted 20 February 2014 - 12:03
I use http://www.vhannibal.net It's much more accurate. They update the entire motor settings for Enigma2 two times a month. No need to do any scans...
I do the same as above . It is most accurate and well defined
Re: Poll: settings and transponder scanning on satellite #15
Posted 15 March 2014 - 00:38
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390
Re: Poll: settings and transponder scanning on satellite #16
Posted 7 April 2014 - 23:46
openpli updates wrong ! Nilesat 7.0W ....
somebody update at feed nilesat as 7.3W !!! and there is no such thing !
this update cause trouble ! and confuse the tuner with current channels list !
I attached satellites.xml fixed ! with 7.0W not 7.3W !!!
u can see no 7.3W !!:
http://en.kingofsat.net/satellites.php
http://www.lyngsat.c...t-7-West-A.html
plz fix that cause ... every time u update transponders ... I have to fix that manually !
Attached Files
ET9000,DM500s+usbTTdvb-3600 ,DVB2000,Humax5400, MACbook PRO retina 13", MAC pro 2 x Quad XEON-2.8GB , 8GB ECC, 4TB+FusionDrive(SSD) , LG-24FHD, HD6870,Debian server
"Since the dawn of our species, Man has been blessed with curiosity"
Re: Poll: settings and transponder scanning on satellite #17
Re: Poll: settings and transponder scanning on satellite #18
Posted 8 April 2014 - 00:12
yup, but somebody eliminate 7.0W ! from sat.xml... and mix it with 8.0 ...into 7.3 !
BR
Edited by ajeeb, 8 April 2014 - 00:13.
ET9000,DM500s+usbTTdvb-3600 ,DVB2000,Humax5400, MACbook PRO retina 13", MAC pro 2 x Quad XEON-2.8GB , 8GB ECC, 4TB+FusionDrive(SSD) , LG-24FHD, HD6870,Debian server
"Since the dawn of our species, Man has been blessed with curiosity"
Re: Poll: settings and transponder scanning on satellite #19
Posted 8 April 2014 - 02:52
openpli updates wrong ! Nilesat 7.0W ....
somebody update at feed nilesat as 7.3W !!! and there is no such thing !
this update cause trouble ! and confuse the tuner with current channels list !
I attached satellites.xml fixed ! with 7.0W not 7.3W !!!
u can see no 7.3W !!:
http://en.kingofsat.net/satellites.php
http://www.lyngsat.c...t-7-West-A.html
plz fix that cause ... every time u update transponders ... I have to fix that manually !
Allowing the positions to just float around is never going to work long term, and just going to cause PLi users to get annoyed and migrate to other images. I don't understand why PLi don't just use the ITU registered positions and stick to them, rather than blindly following the whims of Lyngsat.
Re: Poll: settings and transponder scanning on satellite #20
Posted 8 April 2014 - 05:09
Apparently Lyngsat, King of Sat & satbeams use drifted (i.e. actual) positions instead of the ITU-assigned positions. No idea why, but IMHO no STB-user could possibly be interested in those positions, that change on every (image) update. Instead, those changes cause a lot of issues, completely unnecessary.
I think http://satellites-xml.org/ always uses the correct locations (and besides it's very handy to 'sort' between all kinds of settings), so I suggest to use that as source for updating the image-file satellites.xml.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users