10 replies to this topic

[Pedro_Newbie]

For the ET8000 there is the new feature to turn on/off the blue led in standby.

However the wrong values are written to /proc/stb/power/standbyled. The valid values are on or off, the settings however are writing yes or no

 

Here is the part: http://sourceforge.n...iformat=regular

 

 

[littlesat]

Thanks!

[Pedro_Newbie]

No thank you, with the on/off setting it works now as it should

Edited by Pedro_Newbie, 21 April 2014 - 09:20.

[dolphs]

root@et9x00:~# ls /proc/stb/power/ -la
dr-xr-xr-x    2 root     root             0 May 22 07:06 .
dr-xr-xr-x   18 root     root             0 May 22 07:06 ..
-r--r--r--    1 root     root             0 May 22 07:06 vfd

I was hoping same applied for et9x00, but it seems it is not my lucky day.

Where to ask for possible implementation please?

[littlesat]

When et add the proc in the drivers it will be recognise and possible... Any box may add the specific proc.

[dolphs]

As a side note it appears using the feature "shutdown when in standby" on et9x00 the box does not wake up using the remote control, only wakes up when pressing the device button itself

[littlesat]

With which remote?

[dolphs]

"DMM Advanced" that is, sorry forgot to mention it explicitly - Indeed native et9200 does work, therefore limitation using dream remote I assume ?

[littlesat]

Yep...

[dolphs]

Interesting however as same remote does work on ET10000 ( meaning DMM Advanced and ET10000 in shutdown mode after being in standby )

[mocho]

Interesting however as same remote does work on ET10000 ( meaning DMM Advanced and ET10000 in shutdown mode after being in standby )

How do you use DMM advanced remote? Do you mean de omikron one (dm8000?)