E1Softcam

How to set the default Softcam

Dreambox Settings

E1 Enigma 1 or E1 menus. Click here for the E2 Menus


Simply use the arrow buttons on your remote to highlight the softcam you require and then press the OK button to select it.
We do not talk about what Cam works with what network subscription card or card sharing on this wiki or website.

By default there is NO cam loaded in the softcam settings as shown below. On the 5series of boxes CCcam version 2.0.x is always included in our images for you. On all other E1 models you will have to down load the cam you require (see below).

PLi

Select the default softcam (works with most networks out there) and press the OK button

PLi

If you want to see if your network subscription card is working with this softcam, save the settings (Green button) and then select Softcam again and now press the Yellow button to read your network subscription card.

PLi

As you can see in this case CCcam is reading the free subscription card from this network. If this screen is blank or has an error message you should read the configuration files for the cam you set up and see what you need to do to make it work.

PLi



Note E2 boxes Softcam does not follow what we show here


Back 1 Page : Back to the PLiŽ Wiki : E1 Howtos : DM500 : DM500+ : DM56xx : DM600 : DM7000 : DM7020 : DM7025 : DM800 : DM8000


Download other softcams


Sticky Emu/Soft Cam for channel and provider selection

Soft Cams can be installed through the this section

Software Management

Downloadable Soft Cams/Cardservers (version numbers are left out):

* Camd 3
* Camx
* Ccamd
* CCcam [included in all DM500 PLi images]
* Evocamd
* Mgcamd
* Newcamd
* Opencam
* Scam
* NewCs Cardserver

Pli Pli


Cams are managed by the Plimgr service, which acts as a bridge between Enigma and the various user-selected emu's. Through the PLi setup page blue button (if you have not assigned it to something else) -> softcam setup", sticky emu's for specific channels and providers can be easily selected, apart from a default softcam for general usage.

Note: [legacy] when different softcams are used for separate providers, softcam X used for recording channel A will be stopped when you Zap to channel B (using softcam Y).




To add a Soft Cam manually:

FTP the appropriate files to your box and chmod the files


Create an empty file with the same name as the Soft Cam, for example "pcam". Optionally, you can enter the version number of the softcam as text and save it




Upload this file to /var/etc/plimgr/cams/



PLi Manager will now detect the new Soft Cam "pcam", if you entered a version number in your file it will be recognised as such

Choose the new Soft Cam in the Soft Cam Setup



Or via a Telnet session:


FTP the appropriate files to your box and chmod the files



Telnet to your box and type:



echo "1.9" > /var/etc/plimgr/cams/pcam


(in this example your softcam will be displayed as version 1.9)



Softcam configurations files

To find out more details on any Soft Cam listed on this page, remember google is your friend. We do not write any of these so we can not support them.

Here's a list of where to place what files for which emu on the DM500

* Newcamd
o Keys directory: /var/tuxbox/scce -keylist, ppua, constancw, rsakeylist, tpscrypt (/var/scce for versions < 6.01)
o Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
o Config files: /var/tuxbox/config/newcamd - newcamd.conf, cardserv.cfg, betad.cfg (/var/tuxbox/config for versions < 6.02)
o AU files: /var/tuxbox/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin, sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin, nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin, nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist (/var/scce for versions < 6.01)

* UCAS/SCAM
o Keys directory: /var/keys - 'SoftCam.Key', seca2,nagra,via, irdeto,conax
o Program files: /var/bin - scam
o Config files: /var/keys - softcam.cfg
o AU files: /var/keys/ - seca2 /nagra_rom

* Cam X
o Keys directory: /var/keys - 'SoftCam.Key'
o Program files: /var/bin - camx server
o Config files: /var/etc - camx.config
o AU files: var/keys/ - AutoRoll.key

* Evocamd
o Keys directory: /var/keys - Autoupdate.Key & Keylist.txt
o Program files: /var/bin - evocamd
o Config files: /var/keys - camd_cfg
o AU files: /var/keys - Autoupdate.Key, /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin

* Radegast
o Keys directory: /var/keys - SoftCam.Key & AutoRoll.key
o Program files: /var/bin - rdgd, camd.rdgd, netpilot
o Config files: /var/etc - radegast.cfg
o AU files: Need a patched driver for older conax cards

* Camd 3
o Keys directory: /var/keys - camd3.keys
o Program files: /var/bin - camd3, pcamd
o Config files: /var/keys - camd3.conf, camd3.config, camd3.servers, camd3.users, pw_start.services, camd3.conf only needed for older camd3
o AU files: /var/keys/ - seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys

* MGcamd
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.key, tps
o Program files: /var/bin - mgcamd
o Config files: /var/keys - mg_cfg
o AU files:

* Xcamd
o Keys directory: /var/keys - Keys.txt, AutoRoll.key
o Program files: /var/bin - xcamd
o Config files: /var/etc - xcamd.conf
o AU files: /var/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom

* CCcam
o Keys directory: /var/keys - SoftCam.Key, AutoRoll.key, constant.cw
o Program files: /var/bin - CCcam
o Config files: /var/etc - CCcam.cfg
o AU files: uknown

* The latest Cam X:
o Keys directory: /var/keys - SoftCam.Key
o Program files: /var/bin - camx(ng) + server(ng)
o Config files: /var/etc - camx.config
o AU files: var/keys/ - AutoRoll.key



Back 1 Page : Back to the PLiŽ Wiki : E1 Howtos : DM500 : DM500+ : DM56xx : DM600 : DM7000 : DM7020 : DM7025 : DM800 : DM8000
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki