Reflashed my Duo after losing HDD contents after recent online update, but I`m unable to scan 28.2E, have setup tuners accordingly (simple , single, 28.2E) but manual scan is set to 30.5E ??
Unable to scan 28.2E
Started by smaxy, 22 Sep 2012 13:18
31 replies to this topic
Re: Unable to scan 28.2E #2
-
- Member
- 23 posts
0
Neutral
Posted 22 September 2012 - 13:31
sorted, set tuner to 26.0E and now manual scan OK (28.2E) 
edit: no channels found !!
edit: no channels found !!
Edited by smaxy, 22 September 2012 - 13:34.
Re: Unable to scan 28.2E #3
-
- PLi® Core member
- 46,960 posts
+541
Excellent
Posted 22 September 2012 - 14:22
Can you please explain what you do exactly?
What satellites.xml file are you using, the stock one in /etc/tuxbox or one of your own in /etc/enigma2?
Before you start scanning, you should use the satfinder and see if you see signal on some transponders (use the "predefined transponders" option).
What satellites.xml file are you using, the stock one in /etc/tuxbox or one of your own in /etc/enigma2?
Before you start scanning, you should use the satfinder and see if you see signal on some transponders (use the "predefined transponders" option).
Edited by Erik Slagter, 22 September 2012 - 14:22.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Unable to scan 28.2E #4
-
- Member
- 23 posts
0
Neutral
Posted 22 September 2012 - 14:29
I`m using the stock xml. file directly after a fresh install, going into Satfinder the sat is 30.5E Arabsat even though I`ve set up my tuners for 28.2E Eutelsat/Astra.
Re: Unable to scan 28.2E #5
-
- PLi® Core member
- 46,960 posts
+541
Excellent
Posted 22 September 2012 - 14:32
Can you please check the confuration of your tuners? There may have been an unintentional change lately.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Unable to scan 28.2E #6
-
- Member
- 23 posts
0
Neutral
Posted 22 September 2012 - 14:34
Have done so, selecting 118.0E for instance, shows as 122.2E in Satfinder.
Re: Unable to scan 28.2E #7
-
- Senior Member
- 69 posts
+6
Neutral
Posted 23 September 2012 - 07:23
I have the same issue. The manual scan dialog shows the satellite 1 after that the satellite i have choosen.
I have selectet Astra 1KR 19 and Eutelsat Hot Bird 13A.
The manual scan show me Arabsat 5C (20.0E) and Eutelsat 16A (16.0E).
I have selectet Astra 1KR 19 and Eutelsat Hot Bird 13A.
The manual scan show me Arabsat 5C (20.0E) and Eutelsat 16A (16.0E).
Re: Unable to scan 28.2E #8
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 23 September 2012 - 07:39
I have the same issue, I'm using 13, 19.2, 23.5 and 28.2 and have the choices of 16, 20, 25.5 and 30.5, so all are shifted 1 position. In the tunerconfiguration the right values are selected.
This issue is also present on my back-up with the latest update 21st of September. The 19th of September update is working as it should
This issue is also present on my back-up with the latest update 21st of September. The 19th of September update is working as it should
Edited by Pedro_Newbie, 23 September 2012 - 07:40.
Re: Unable to scan 28.2E #9
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 23 September 2012 - 12:22
should be fixed in an hour or so
Re: Unable to scan 28.2E #10
-
- Member
- 45 posts
0
Neutral
Posted 23 September 2012 - 12:52
thx, its now ok. 
Re: Unable to scan 28.2E #12
-
- Senior Member
- 69 posts
+6
Neutral
Posted 23 September 2012 - 13:44
Thanks 
Re: Unable to scan 28.2E #13
-
- Member
- 23 posts
0
Neutral
Posted 23 September 2012 - 14:34
spoke too soon, problem still exists for me 
Re: Unable to scan 28.2E #14
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 23 September 2012 - 14:40
should be fixed in an hour or so
The build for the VU+ Duo didn't run? Last build is from this morning 7.43 hrs.
Re: Unable to scan 28.2E #15
-
- PLi® Core member
- 2,269 posts
+118
Excellent
Posted 23 September 2012 - 15:13
little patience, for whatever reason vuduo image is always /?/ the last one that rolls off the assembly line 
True sarcasm doesn't need green font...
Re: Unable to scan 28.2E #16
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 23 September 2012 - 15:19
no, actually the vusolo is last
Re: Unable to scan 28.2E #17
-
- PLi® Core member
- 2,269 posts
+118
Excellent
Posted 23 September 2012 - 15:52
indeed...
//hmm, vusolo + the last in line to build = this could be too hard to bear
I would suggest to move the solo build up much higher, before someone consider this as bullying
//hmm, vusolo + the last in line to build = this could be too hard to bear
I would suggest to move the solo build up much higher, before someone consider this as bullying
True sarcasm doesn't need green font...
Re: Unable to scan 28.2E #18
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 23 September 2012 - 15:57
indeed...
//hmm, vusolo + the last in line to build = this could be too hard to bear
I would suggest to move the solo build up much higher, before someone consider this as bullying
well, the builds are more or less running in alphabetical order.
A few boxes have been moved to the front though, for the simple reason that these are the main development/test boxes of some of the developers, allowing the quickest possible confirmation about whether or not a problem is really fixed, after a hotfix / manual rebuild on the buildserver.
Putting the vusolo at the front would not make much sense, from that point of view
Re: Unable to scan 28.2E #19
-
- Member
- 23 posts
0
Neutral
Posted 23 September 2012 - 16:39
Now it`s sorted, thanks
Re: Unable to scan 28.2E #20
-
- Member
- 23 posts
0
Neutral
Posted 23 September 2012 - 17:09
wtf!! lost the contents of my HDD again after latest upgrade, has anyone else got the same problem or is it just me
did a full backup, but saved it to HDD!!
did a full backup, but saved it to HDD!!
Edited by smaxy, 23 September 2012 - 17:10.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
