Posted 26 March 2013 - 21:24
DM800SE flashed with OpenPLi-3.0-beta-dm800se-20130326
I have an external HDD connected to USB port and mounted as /media/hdd
in "Harddisk setup" menù I set up "1 minute" the stand-by time and then restarted the decoder
But I noticed the hard disk never goes in stand-by mode.
Any help?
Thank You.
Posted 26 March 2013 - 21:35
do you using picons stored on hdd ?
btw, for older hdd you can use http://openpli.org/f...in/#entry245528
Edited by ims, 26 March 2013 - 21:39.
Posted 26 March 2013 - 23:22
Edited by betacentauri, 26 March 2013 - 23:23.
Posted 27 March 2013 - 08:55
do you using picons stored on hdd ?
btw, for older hdd you can use http://openpli.org/f...in/#entry245528
No, on the HDD nothing is stored, neither picon or EPG
Posted 27 March 2013 - 12:54
My USB HDD sleeps correctly on the 800SE, on one of the latest OpenPLi. I used TSPanel for setting up the disk, but shouldn't differ.
Posted 27 March 2013 - 13:56
My USB HDD sleeps correctly on the 800SE, on one of the latest OpenPLi. I used TSPanel for setting up the disk, but shouldn't differ.
regarding using TsPanel have you done a software update of your box lately? no problems???
vuduo2 openpli6.1 1TB HDD 2xdualS2tuner
av receiver denon - samsung 4k hdr+ 65inch UE65MU7000 - bose accoustimas 7.1 
tvv kaart & schotel(64cm), duo lnb, OSCAM
logitech harmony ultimate
Posted 27 March 2013 - 14:01
Sofware update: last week. Will try with newest update soon.
Posted 27 March 2013 - 18:19
One minute is far too short anyway, you'll ruin your harddisk.
But anyway, on most USB harddisks you cannot configure the spindowntime anyway, that's normal.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 27 March 2013 - 21:45
But anyway, on most USB harddisks you cannot configure the spindowntime anyway, that's normal.
Yes, this. I wonder if my USB harddisk takes note of the 800SE setting, probably not.
Posted 28 March 2013 - 08:36
One minute is far too short anyway, you'll ruin your harddisk.
But anyway, on most USB harddisks you cannot configure the spindowntime anyway, that's normal.
I have an old PATA HDD 250 Gb and I bought a case PATA TO USB
With OE 1.6 images the HDD goes stand-by after the time I set up without problem, I use HDD only sometimes to play movies, NO PICON, NO EPG
I tested different OE 2.0 images and the HDD DOES NOT go stand-by after the time I set up
Posted 28 March 2013 - 09:01
Is not permanent timeshift used ?
I am using my hddsleep plugin for 800SE, because my hdd on usb did not sleeps well. On XP1000 i am using e2 builded sleeping and there it works well. Try use plugin (then disable sleeping in e2).
Posted 28 March 2013 - 09:22
Is not permanent timeshift used ?
I am using my hddsleep plugin for 800SE, because my hdd on usb did not sleeps well. On XP1000 i am using e2 builded sleeping and there it works well. Try use plugin (then disable sleeping in e2).
No, I do not use timeshift
The plugin You use is this? Could be used on OE 2.0?
http://openpli.org/f...ndpost&p=245528
Thank You
Posted 28 March 2013 - 09:25
yes, it is this plugin. You can there try immediately sleep with button too and you can then hear, if some interrupts sleep.
Posted 28 March 2013 - 10:02
yes, it is this plugin. You can there try immediately sleep with button too and you can then hear, if some interrupts sleep.
Thank You
Posted 2 April 2013 - 09:16
HDD does NOT goes in STAND-BY even if I installed the plugin [enigma2-plugin-extensions-hddsleep_1.70_mipsel.ipk.tar.gz]
E2 has been restarted
The USB HDD is mounted as /media/hdd (I used the plugin "Device manager)
The "strange" thing it happens, when I open the plugin, "Mounted Device" is blank
I have "HDD" beside the line "Sleep time for /dev/sdb"
example image from plugin page
Edited by CrasHBoneS, 2 April 2013 - 09:16.
Posted 2 April 2013 - 09:35
what write: "mount" in telnet on your box ?
Put here screenshot from Hdd Sleep plugin too.
Edited by ims, 2 April 2013 - 09:40.
Posted 2 April 2013 - 09:43
what write: "mount" in telnet on your box ?
I would thank You for the help, but now I reverted to OpenPli OE 1.6
OpenPli OE 2.0 was a "test", I think I will repeat the "test" with OE 2.0 next week end.
I will write here again the result of the telnet command "mount"
Thank You
Posted 3 April 2013 - 21:42
Update
DM800SE flashed with OpenPLi-3.0-beta-dm800se-20130403
External HDD connected to USB port and mounted as /media/hdd with Device Manager plugin
In Device Manager, INFO menu, I set up "Never stand-by" the stand-by time and then restarted the decoder
Installed the plugin [enigma2-plugin-extensions-hddsleep_1.70_mipsel.ipk.tar.gz]
The HDD, finally, is listed in "Mounted devices" /dev/sdb1 on /media/hdd
but still DOES NOT GO in stand-by after the time I set up
When I open HDD sleep plugin, If I select the HDD and I press blue button [sleep sdb] NOTHING happens
This is part of fstab file
UUID=6c1edd9c-9faf-4762-8ef3-c69b1510362c /media/hdd auto
this is part of the telnet command "mount"
/dev/sdb1 on /media/hdd type ext4 (rw,relatime,barrier=1,data=ordered)
Posted 4 April 2013 - 13:14
try enable Create log there in plugin and then see after some time into /tmp/hddsleep.log, what there is wroted. ( Into log is wroted, when disk waking-up )
Or you can try from telnet use hdd-idle manualy http://hotzi.no-ip.o...2html?hd-idle 1
When is plugin installed, hdd-idle is in /usr/bin
Posted 4 April 2013 - 13:44
this is the log, it logs something only when I browse folder in HDD via FTP
date: 2013-04-04, time: 14:32:48, disk: sdb, running: 60, stopped: 30 date: 2013-04-04, time: 14:39:08, disk: sdb, running: 67, stopped: 313
I tried both
0 members, 0 guests, 0 anonymous users
