Ook nog even een dmesg output
openpli 3.0 et5x00
et5x00 login: root
root@et5x00:~# dmesg
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecf10095
After: NandSelect=50000200, nandConfig=15142200
Block size=00020000, erase shift=17
NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
eccLevel=15, 1Ksector=0, oob=16
nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
<--brcmnand_set_acccontrol: acc b4: d7ff1010, after: d7ff1010
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS1
Found NAND on CS1: ACC=d7ff1010, cfg=15142200, flashId=ecf10095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 128MB @00000000
B4: NandSelect=50000200, nandConfig=15142200, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecf10095
After: NandSelect=50000200, nandConfig=15142200
Found NAND flash on Chip Select 1, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS1
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS1
nand_read_bbt: Bad block at 0x04060000
nand_read_bbt: Bad block at 0x06740000
nand_read_bbt: Bad block at 0x06780000
Adjust partition complete size from entire device to 7f00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 7900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000007f00000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000007f00000 : "rootfs"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI DBG (pid 1): ubi_attach_mtd_dev: sizeof(struct ubi_ainf_peb) 48
UBI DBG (pid 1): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
UBI DBG (pid 1): io_init: min_io_size 2048
UBI DBG (pid 1): io_init: max_write_size 2048
UBI DBG (pid 1): io_init: hdrs_min_io_size 2048
UBI DBG (pid 1): io_init: ec_hdr_alsize 2048
UBI DBG (pid 1): io_init: vid_hdr_alsize 2048
UBI DBG (pid 1): io_init: vid_hdr_offset 2048
UBI DBG (pid 1): io_init: vid_hdr_aloffset 2048
UBI DBG (pid 1): io_init: vid_hdr_shift 0
UBI DBG (pid 1): io_init: leb_start 4096
UBI DBG (pid 1): io_init: max_erroneous 96
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
ata1: SATA link down (SStatus 4 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci-brcm
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ata2: SATA link down (SStatus 4 SControl 300)
usb 2-1.1: new high-speed USB device number 3 using ehci-brcm
scsi2 : usb-storage 2-1.1:1.0
usb 2-1.2: new full-speed USB device number 4 using ehci-brcm
UBI DBG (pid 1): scan_all: scanning is finished
UBI: max. sequence number: 363
UBI: attached mtd2 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 121 MiB
UBI: number of good PEBs: 965
UBI: number of bad PEBs: 3
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 965
UBI: number of PEBs reserved for bad PEB handling: 9
UBI: max/mean erase counter: 2/0
UBI: image sequence number: 1805748916
ALSA device list:
No soundcards found.
Warning: unable to open an initial console.
UBI: background thread "ubi_bgt0d" started, PID 50
UBIFS DBG (pid 51): ubifs_bg_thread: background thread "ubifs_bgt0_0" started, PID 51
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 119484416 bytes (116684 KiB, 113 MiB, 941 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS DBG (pid 1): mount_ubifs: compiled on: Jan 27 2013 at 16:04:22
UBIFS DBG (pid 1): mount_ubifs: min. I/O unit size: 2048 bytes
UBIFS DBG (pid 1): mount_ubifs: max. write size: 2048 bytes
UBIFS DBG (pid 1): mount_ubifs: LEB size: 126976 bytes (124 KiB)
UBIFS DBG (pid 1): mount_ubifs: data journal heads: 1
UBIFS DBG (pid 1): mount_ubifs: UUID: 4ED32729-3A34-4322-A16B-59D675840338
UBIFS DBG (pid 1): mount_ubifs: big_lpt 0
UBIFS DBG (pid 1): mount_ubifs: log LEBs: 5 (3 - 7)
UBIFS DBG (pid 1): mount_ubifs: LPT area LEBs: 2 (8 - 9)
UBIFS DBG (pid 1): mount_ubifs: orphan area LEBs: 1 (10 - 10)
UBIFS DBG (pid 1): mount_ubifs: main area LEBs: 941 (11 - 951)
UBIFS DBG (pid 1): mount_ubifs: index LEBs: 19
UBIFS DBG (pid 1): mount_ubifs: total index bytes: 1051000 (1026 KiB, 1 MiB)
UBIFS DBG (pid 1): mount_ubifs: key hash type: 0
UBIFS DBG (pid 1): mount_ubifs: tree fanout: 8
UBIFS DBG (pid 1): mount_ubifs: reserved GC LEB: 65
UBIFS DBG (pid 1): mount_ubifs: first main LEB: 11
UBIFS DBG (pid 1): mount_ubifs: max. znode size 240
UBIFS DBG (pid 1): mount_ubifs: max. index node size 192
UBIFS DBG (pid 1): mount_ubifs: node sizes: data 48, inode 160, dentry 56
UBIFS DBG (pid 1): mount_ubifs: node sizes: trun 56, sb 4096, master 512
UBIFS DBG (pid 1): mount_ubifs: node sizes: ref 64, cmt. start 32, orph 32
UBIFS DBG (pid 1): mount_ubifs: max. node sizes: data 4144, inode 4256 dentry 312, idx 188
UBIFS DBG (pid 1): mount_ubifs: dead watermark: 2048
UBIFS DBG (pid 1): mount_ubifs: dark watermark: 6144
UBIFS DBG (pid 1): mount_ubifs: LEB overhead: 2656
UBIFS DBG (pid 1): mount_ubifs: max. dark space: 5781504 (5646 KiB, 5 MiB)
UBIFS DBG (pid 1): mount_ubifs: maximum bud bytes: 8388608 (8192 KiB, 8 MiB)
UBIFS DBG (pid 1): mount_ubifs: BG commit bud bytes: 6815744 (6656 KiB, 6 MiB)
UBIFS DBG (pid 1): mount_ubifs: current bud bytes 114688 (112 KiB, 0 MiB)
UBIFS DBG (pid 1): mount_ubifs: max. seq. number: 102523
UBIFS DBG (pid 1): mount_ubifs: commit number: 97
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 252k freed
scsi 2:0:0:0: Direct-Access Kingston DT Mini 10 PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sda] No Caching mode page present
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page present
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page present
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
usb 2-1.1: USB disconnect, device number 3
usb 2-1.1: new high-speed USB device number 5 using ehci-brcm
usb 2-1.1: device descriptor read/all, error -71
hub 2-1:1.0: unable to enumerate USB device on port 1
usb 2-1.1: new high-speed USB device number 7 using ehci-brcm
scsi3 : usb-storage 2-1.1:1.0
usb 2-1.1: USB disconnect, device number 7
usb 2-1.1: new high-speed USB device number 8 using ehci-brcm
scsi4 : usb-storage 2-1.1:1.0
scsi 4:0:0:0: Direct-Access Kingston DT Mini 10 PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sda] No Caching mode page present
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] No Caching mode page present
sd 4:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 4:0:0:0: [sda] No Caching mode page present
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] Attached SCSI removable disk
root@et5x00:~#