I have DUO2 (tuner Twin DVB-S2 and new DVB-T2/C), OpenPLI image. I search DVB-T2 and no signal. OpenPLI not supported new DVB-T2? DVB-T signal is OK.
DVB-T2/DVB-C not supported?
Re: DVB-T2/DVB-C not supported? #2
Re: DVB-T2/DVB-C not supported? #3
Re: DVB-T2/DVB-C not supported? #4
Posted 10 April 2014 - 10:30
In fact, it does support this tuner, If you manage to do the service scan. A very hard way to do it, is first flash with original image (or BH or VTi) , and do the service scan there. Then memorize result with DreamboxEdit to yor PC. Then flash with OpenPLi and reload settins back to the box. Or do the service scan with a usb-T2 tuner.Should work.
Edited by tappari, 10 April 2014 - 10:34.
Re: DVB-T2/DVB-C not supported? #5
Posted 10 April 2014 - 11:47
What you point here is just that in the terrestrial.xml file proposed by Openpli4 there is no entries to search for DVB-T2 signal with automatic scan.
Perform a manual scan with all the valid parameters and you should also find your services with OpenPli 4.
You can try to pick-up another terrestrial.xml from another image and test is in Openpli4 and perform a scan, this should work otherwhise it is the terrestrial.xml parser which needs to be updated.
If an existing channel list is working this means that Openpli4 properly handles DVB-T2.
Edited by Pr2, 10 April 2014 - 11:48.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: DVB-T2/DVB-C not supported? #6
Posted 10 April 2014 - 12:07
In fact, it does support this tuner,...
It does not recognize the internal tuner as a T2 tuner:
root@vuduo2:~# cat /proc/bus/nim_sockets NIM Socket 0: Type: DVB-T2 Name: Vuplus DVB-T NIM(SSH108) Mode 0: DVB-C Mode 1: DVB-T Frontend_Device: 0 I2C_Device: 2 NIM Socket 1: Type: DVB-T2 Name: Vuplus DVB-T NIM(SSH108) Mode 0: DVB-C Mode 1: DVB-T Frontend_Device: 1 I2C_Device: 3
While on the Ultimo it does:
root@vuultimo:~# cat /proc/bus/nim_sockets NIM Socket 0: Type: DVB-T2 Name: Vuplus DVB-T NIM(SSH108) Mode 0: DVB-C Mode 1: DVB-T2 Frontend_Device: 0 I2C_Device: 2 NIM Socket 1: Type: DVB-T2 Name: Vuplus DVB-T NIM(SSH108) Mode 0: DVB-C Mode 1: DVB-T2 Frontend_Device: 1 I2C_Device: 3 NIM Socket 2: Type: DVB-T2 Name: Vuplus DVB-T NIM(SSH108) Mode 0: DVB-C Mode 1: DVB-T2 Frontend_Device: 2 I2C_Device: 1
As I said: VU has confirmed this and will fix it in the next driver release.
Re: DVB-T2/DVB-C not supported? #7
Posted 10 April 2014 - 12:25
Not with Duo2. With Ultimo manual scan is possible, but With Duo2 you cannot select T2 when scanning, just normal T even in manual mode. Terrestrial.xml has nothing to do with this. The thing is, that with existing drivers Duo2 does not recognize this tuner as T2 in service scan (not even in manual scan) . It operates fine in T2 mode if scanning has been done otherwise..
Re: DVB-T2/DVB-C not supported? #8
Re: DVB-T2/DVB-C not supported? #9
Posted 10 April 2014 - 15:53
Ok thanks for the details.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: DVB-T2/DVB-C not supported? #10
Re: DVB-T2/DVB-C not supported? #11
Re: DVB-T2/DVB-C not supported? #12
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users